AIRLESSCO Prolight Contractor Series Specifications download pdf (Page 16)

Spray Gun Operation

SPRAY GUN

Attach spray gun to airless unit and tighten ttings securely.

Set the gun safety latch. (Also may be called gun safety

lock, or trigger lock)

* The gun safety latch should always be set when the gun is

not being triggered.

Read all warnings and safety precautions supplied with the

spray gun and in product manual.

SPRAY TIP ASSEMBLY

1. Be sure the pressure relief procedure is followed

before assembling tip and housing to the gun.

2. Insert REV-TIP™ cylinder into the REV-GUARD™

(guard housing assembly).

3. Guide the metal seat into REV-GUARD™ (guard

housing assembly) through the retaining nut and turn

until it seats against the cylinder.

4. Insert the O-Ring gasket onto the metal seat so that it

ts into the grooves.

5. Finger tighten REV-GUARD™ retaining nut onto the gun.

6. Turn guard in the desired position.

7. Completely tighten the retaining nut.

O-Ring Gasket

Metal Seat

REV-TIP™ Cylinder

Retaining Nut

Spray Position Shown

Reverse to

Unplug

REV-GUARD™

Guard Housing Assembly

TO REMOVE CLOGS FROM SPRAY TIP

1. Lock gun safety latch.

2. Turn REV-TIP™ handle 180 degrees.

3. Disengage trigger lock and trigger gun into

the pail.

4. If the REV-TIP™ handle appears locked

(resists turning), loosen the retaining nut. The

handle will now turn easily.

5. Engage gun safety latch and return handle to

the spray position.

Retaining Nut

CLEANING SPRAY GUN

CLEANING FILTER IN GUN HANDLE

Immediately after the work is nished, ush the gun out

with a solvent. Brush pins with solvent and oil them

lightly so they will not collect dried paint.

To clean the lter, use a brush dipped in an appropri-

ate solvent. Change or clean lters at least once a day.

Some types of latex may require a lter change after

four hours of operation.

CLOGGED FLAT TIP

Should the spray tip become clogged, relieve

pressure from hose by following the "Pressure Re-

lief Procedure." Secure gun with the safety latch,

take off guard, take out the tip, soak in appropriate

solvent & clean with a brush. (Do not use a needle

or sharp pointed instrument to clean the tip. The

tungsten carbide is brittle and can chip.)

™

Reversible

Spray Tip

Tip Guard

Trigger Guard

MAJOR COMPONENTS OF SPRAY GUN &

REVERSIBLE REV-TIP

™

Gun Handle. Unscrew

from gun head to service

lter inside.

Gun Safety

Latch or Lock

Press up here & pull gently

to remove trigger guard

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Comments to this Manuals

No comments

AIRLESSCO Prolight Contractor Series Specifications Page 16

Comments to this Manuals

Related products and manuals for Paint Sprayer AIRLESSCO Prolight Contractor Series